TM 5-3805-280-24-2
Fuel System
35
NOTE: When installing drive gear-to-pump hub cap
53
screws (B), apply a slight clockwise force to drive
gear to eliminate any backlash with camshaft
gear.
8. Install drive gear-to-pump hub cap screws (B) and
tighten to specifications.
Nippondenso Injection Pump Drive Gear Cap Screws--Specification
Torque ............................................................................. 47 Nm (35 lb-ft)
9. Remove JDG886 Injection Pump Timing Pin (A) from
injection pump hub.
10. Install injection pump drive gear cover using a new
O-ring, if needed. Tighten cap screws to
specifications.
Nippondenso Injection Pump Drive Gear Cover--Specification
Torque .............................................................. 5 Nm (3.7 lb-ft) (44 lb-in.)
A--Timing Pin
B--Cap Screws
Continued on next page
RG,35,JW7600
1920NOV973/6
13-432
