TM 5-3805-280-24-2
Fuel System
35
IMPORTANT: DO NOT move delivery valve fittings
54
while tightening line nuts. If delivery
valve and barrel housing rotates while
tightening a fuel line nut, injection
pump fuel delivery will be altered. The
injection pump will have to be
recalibrated on a test stand by an
authorized diesel repair station.
NOTE: Remove protective caps and plugs that were
installed on fuel system components during
injection pump removal.
A--Fuel Delivery Lines
11. Connect fuel delivery lines (A). Tighten line nuts to
specifications.
Fuel Injection Pump Delivery Lines--Specification
Torque ............................................................................. 27 Nm (20 lb-ft)
RG,35,JW7600
1920NOV974/6
12. Connect aneroid line (A).
13. Connect fuel supply pump lines (C).
14. Connect fuel inlet line (D) and leak-off line (E).
15. Connect injection pump oil line (B) to cylinder block
fitting.
16. Connect fuel shutoff solenoid connector.
A--Aneroid Line
B--Injection Pump Oil Line
C--Fuel Supply Pump Lines
D--Fuel Inlet Line
E--Leak-Off Line
Continued on next page
RG,35,JW7600
1920NOV975/6
13-433
