TM 5-3805-280-24-2
Cooling System
REMOVE AND INSTALL FAN AND FAN
GUARD
CAUTION: Explosive release of fluids from
pressurized cooling system can cause serious
burns.
Shut off engine. Only remove filler cap when
cool enough to touch with bare hands. Slowly
loosen cap to first stop to relieve pressure
before removing completely.
1. Open hood.
05
0510
3
TX,05,UU3882
1914NOV961/2
2. Remove cap screws (A). Remove fan guard.
3. Remove cap screws (B). Remove fan.
4. Replace parts as necessary.
5. Install fan. Tighten cap screws.
Engine Fan-to-Pulley Cap Screw--Specification
Torque ............................................................................. 70 Nm (50 lb-ft)
A--Cap Screw (4 used)
B--Cap Screw (4 used)
TX,05,UU3882
1914NOV962/2
14-7