TM 5-3805-280-24-2
Robert Bosch Starting Motor Repair
TURNING COMMUTATOR DOWN
Minimum diameter: 42.5 mm (1.67 in.)
After turning the commutator down, undercut its insulation
60
by approximately. 0.5--0.8 mm (0.02--0.03 in.) with a
10
commutator saw and then finish-turn.
10
A--Solenoid Lug
B--Claw
C--Turn Down Only to Here
RG,RG34710,2353
1915Mar971/1
TESTING COMMUTATOR FOR
OUT-OF-ROUNDNESS
Out of roundness:
Commutator, max: 0.03 mm (0.0012 in.)
Stack of armature plates, max: 0.05 mm (0.002 in.)
Check armature once again for grounds and short circuits.
RG,RG34710,2354
1915Mar971/1
16-92
