TM 5-3805-280-24-2
Operator's Station
Tighten cap screws.
13. Repair or replace parts as necessary.
Cab-to-Platform Cap Screw--Specification
Lift each corner of platform to remove and install
rubber mounts (1).
Torque....................................................................... 64 Nm (47 lb-ft)
Tighten cap screw (2).
Tighten lock nuts (6).
Rubber Mount-to-Frame Cap Screw--Specification
Cab and Platform-to-Rubber Mount Lock Nut--Specification
Torque..................................................................... 108 Nm (80 lb-ft)
Torque................................................................... 205 Nm (152 lb-ft)
14. Before installing cab, check that all lines and
wiring harnesses are out of the way so they are
not pinched when cab is installed.
15. Install the cap screws (9) with HEX HEAD at the
front and left side of cab. Install cap screws (7)
with SOCKET HEAD at the rear and right side.
TX,18,SB749 1921SEP986/6
18
1800
5
18-5
