TM 5-3805-280-24-2
Heating and Air Conditioning
00--Bracket
12--Nut
23--Bracket
39--Wiring Harness
01--Cap Screws
14--Cap Screw
24--Cap Screw
43--Clip
03--Bracket
15--Cap Screw
25--Bracket
44--Clip
04--Spacer
16--Cap Screw
26--Cap Screw
45--Cap Screw
05--Cap Screw
17--Lock Washer
31--Hose
46--Clip
06--Washer
18--Nut
32--Hose
47--Receiver Dryer
07--Lock Washer
19--Cap Screw
33--Cap Screw
48--Condenser
10--Compressor
20--Belt
34--Cap Screw
11--Lock Washer
22--Bracket
37--Cap Screw
3. Evacuate and charge the system. (See procedures
1. Recover the refrigerant from the system. (See
in this group.)
procedure in this group.)
4. Adjust air conditioning compressor belt tension.
2. Remove and install compressor (10). Install caps
(See procedure in this group.)
and plugs to close all open lines.
Repair or replace compressor as necessary.
TX,18,UU3828
1910JAN972/2
DISASSEMBLE AND INSPECT AIR
CONDITIONING COMPRESSOR
1. Mount holding fixture in a bench vise and support
compressor on holding fixture.
NOTE: Mounting fixture can be made with two pieces of
flat stock and two lengths of threaded rod.
18
Weld one piece of stack perpendicular to other,
1830
drill two holes and install threaded rod as shown.
13
Compressor can also be mounted in pivoting
D01006AA Bench Mounted Holding Fixture or
similar holding device.
2. Put compressor in a bench holding fixture.
Continued on next page
TX,18,UU3829
1921SEP981/26
18-33
