TM 5-3805-280-24-2
Heating and Air Conditioning
11. Remove six through-bolts using special hex drive (A).
IMPORTANT: Do not remove through-bolts unless
suction and discharge manifolds are in
place and tight.
12. Carefully pry head from body using a screw driver.
Pry only slightly around the circumference of the
head. Repeat this procedure until head is removed.
A--Special Hex Drive
TX,18,UU3829
1921SEP988/26
13. Remove and discard shaft seal (A).
14. Use two screw drivers to remove discharge valve
plate (B).
A--Shaft Seal
B--Discharge Valve Plate
18
1830
17
Continued on next page
TX,18,UU3829
1921SEP989/26
18-37
