TM 5-3805-280-24-2
Compressor
22
1--Oil Cooler Side Support
18--Clamp
39--Cap Screw (3 used)
57--Oil Lube Bracket
7
2--Cap Screw (3 used)
19--Hose Clamp (3 used)
40--Stiffener Bracket (2
58--Support Rubber
3--Connector (2 used)
20--Tee
used)
Coated Clamp
4--Cap Screw (3 used)
21--Cap Screw
41--Radiator Side Support
59--Lock Nut (2 used)
5--Seal Strip (2 used)
22--Bracket
42--Drain Cock
60--Cap Screw (2 used)
6--Mounting Bracket (2
23--Cap Screw (5 used)
43--Plug (2 used)
61--Clamp Bracket (2
used)
24--Top Cooler Guard
44--Cap Screw
used)
7--Cap Screw (4 used)
25--L-Bracket
45--Fan Orifice Plate
62--Cap Screw
8--RH Cooler Support
26--Oil Cooler
46--Cap Screw (5 used)
63--Nut
Brace (Shown)
27--Nut
47--Radiator Hose
64--Support Rubber
9--LH Cooler Support
28--Cap Screw
Grommet (2 used)
Coated Clamp
Brace
29--Cap Screw
48--Cap Screw (8 used)
65--Lock Nut (2 used)
10--Cap Screw (2 used)
30--L-Bracket
49--Washer (8 used)
66--Washer (2 used)
11--Cap Screw (2 used)
31--L-Bracket
50--Bottom Radiator Hose
67--Cap Screw (2 used)
12--Compressor Top
32--Cap Screw
51--Hose Clamp (2 used)
68--Nut
Cover
33--Plug
52--Top Radiator Hose
69--Cap Screw (5 used)
13--Cap Screw (6 used)
34--Cap Screw
53--Hose Clamp (2 used)
70--Cap Screw (2 used)
14--Washer (6 used)
35--Radiator
54--Bottom Oil Cooler
71--Cap Screw (2 used)
15--Top Bottle Support
36--Radiator Cap
Hose
72--Connecting Plate
16--Bottom Bottle Support
37--Cap Screw (3 used)
55--Top Oil Cooler Hose
17--Overflow Hose
38--Washer (3 used)
56--Cap Screw
9. Remove cap screws (71) and top bottle support
CAUTION: Explosive release of fluids from
(15).
pressurized cooling system can cause
serious burns.
10. Remove cap screw (70) and bottom support (16).
Shut off engine. Only remove filler cap when
11. Remove parts (6--11 and 72).
cool enough to touch with bare hands.
Slowly loosen cap to first stop to relieve
12. Remove seal strips (5).
pressure before removing completely.
13. Disconnect bottom oil cooler hose (54) and
1. Drain coolant from radiator (35).
remove top oil cooler hose (55).
2. Drain hydraulic tank.
14. Remove cap screws (4), cap screws (21, 28, 29,
31 and 34), nut (27), and oil cooler (26).
3. Remove plug (33) to drain hydraulic oil from oil
cooler (26).
15. Loosen hose clamps (53) and upper radiator hose
(52).
4. Disconnect connectors (3).
16. Loosen hose clamp (51) and remove lower
5. Remove cap screws (13) and washers (14).
radiator hose (50).
6. Use a suitable lifting device and remove
17. Remove cap screws (37) and radiator (35).
compressor top cover (12).
18. Remove radiator cap (36), drain cock (42) and
7. Remove cap screws (23) and remove top cooler
plugs (43).
guard (24).
8. Loosen clamp (18). Disconnect overflow hose (17).
Continued on next page
CED,OUOE039,1
1908MAR992/3
20-6
