TM 5-3805-280-24-2
22
2--Nut (2 used)
7--Gasket
12--Seal
17--Connector
15
3--Washer (2 used)
8--Valve Assembly
13--Cap Screw (4 used)
18--Fitting Union
4--Cover
9--Ball
14--Washer (4 used)
19--Reducer
5--Element
10--Spring
15--Cap Screw (2 used)
20--Cap Screw (2 used)
6--O-Ring
11--Plug
16--Bracket
21--Cap Screw (2 used)
7. Remove connector (17) from cover (4).
2. Disconnect three hoses.
NOTE: Support assembly.
8. Repair or replace parts as necessary.
9. Install reducer (19), fitting union (18) and connector
3. Remove cap screw (13 and 20), washers (14) and
(17).
bracket (16).
10. Install clamp (22), washers (3) and nuts (2).
4. Remove nuts (2), washers (3) and clamp (22).
11. Install bracket (16), washers (14) and cap screws
5. Loosen parts (17--19).
(13 and 20).
6. Disconnect connector (17) from fitting union (18).
CED,OUOE039,21 1916APR993/3
20-13