TM 5-3805-280-24-2
22
2--Nut (2 used)
6--Cap Screw (4 used)
10--Washer (2 used)
14--Elbow
19
3--Washer (2 used)
7--Washer (4 used)
11--Connector
15--Oil Filter Element
4--Clamp
8--Oil Filter Bracket
12--Reducer
16--Adapter
5--Cap Screw (2 used)
9--Cap Screw (2 used)
13--Fitting Union
7. Repair or replace parts as necessary.
2. Disconnect two hoses.
NOTE: Support assembly.
8. Connect connector (11) to fitting union (13).
9. Tighten parts (11, 12 and 13).
3. Remove cap screws (5 and 6), washers (7) and
bracket (8).
10. Install clamp (4), washers (3) and nuts (2).
4. Remove nuts (2), washers (3) and clamp (4).
11. Install bracket (8), washers (7) and cap screws (5
and 6).
5. Loosen parts (11, 12 and 13).
6. Disconnect fitting union (13) from connector (11).
CED,OUOE039,22 1916APR993/3
DISASSEMBLE AND ASSEMBLE OIL FILTER
ASSEMBLY
1. Remove reducer (12) and remove fitting union (13).
2. Remove elbow (14) and adapter (16).
3. Remove oil filter element (15).
4. Repair or replace parts as necessary.
5. Install the oil filter element (15).
6. Install adapter (16) and elbow (14).
7. Install fitting union (13) and install reducer (12).
CED,OUOE039,20 1916APR991/1
20-16