Mechanical Drive Elements
CAUTION: Keep the angle between boom and
arm at 90--100 to prevent machine from sliding
2. Park machine with boom to the left side (cab side
toward sprocket) of undercarriage.
3. Disconnect tracks and lay out flat on the floor to the
sprocket end of undercarriage. (See Remove Track
Shoes and Remove Track procedures in Group 0130.)
NOTE: To make removal of main frame-to-swing bearing
cap screws easier after machine is raised into
position, loosen the cap screws one turn at this
4. Turn upperstructure and raise the right side of
machine, using boom down function.
Continued on next page