TM 5-3805-280-24-2
Mechanical Drive Elements
CAUTION: The approximate weight of machine
without tracks is 20 329 kg (44,818 lb).
Machine Without Tracks--Specification
Weight...................................................................... 20 329 kg (44,818 lb)
5. Put 254 mm (10 in.) high hardwood blocks (B),
between lower track rollers (A) and track chain (C).
6. Turn upperstructure back to left side so it is
perpendicular (90) to track.
7. Put two DFT1089 Barrel Supports (G) under the
counterweight (D). (See Section 99 for instructions to
make barrel supports.)
To provide enough clearance, use bridge planks (E)
and hardwood blocks (F) to raise the height of
supports and planks to 1.4 m (55 in.). This height is
the approximate minimum clearance needed to clear
the bottom of rotary manifold. Do not put blocks under
cap screw heads. Keep the height below the
maximum.
Floor-to-Bottom of Main Frame Clearance--Specification
Height .................................................................... 1.4 m (55 in.) minimum
Height ................................................................. 1.45 m (57 in.) maximum
A--Lower Track Roller
B--Hardwood Block (As Required)
C--Track Chain
D--Counterweight
E--Bridge Plank (As Required)
F--Hardwood Block (As Required)
G--DFT1089 Barrel Support (2 used)
43
4350
21
Continued on next page
TX,43,UU3743
1923SEP983/8
22-20