TM 5-3805-280-24-2
Rock Drill
44
9506
35. Install hose guide (36).
23. Install pin (55).
82
36. Install four slippers (30), twelve adjusting shims
24. Install two new rings (58), two new seals (59),
(31), four spacers (32), four wearing plates (33),
chain wheel (62), snap ring (61), two needle
four adjusting shims (34), and eight elastic pins
bearings (60), two rings (57), and adjusting shim
(35).
(56).
37. Install eight screws (27), locknuts (28), and
25. Install stop plate (53), and two screws (54).
washers (29).
26. Install adapter (52), and tee (51).
38. Install two chain axles (26), and two pins (25).
27. Install hose (50).
39. Install hoses reel (24).
28. Install roller (49).
40. Install four elastic pins (23).
29. Install front part (48), and eight screws (47).
41. Install two wearing plates (22), two spacers (21),
four adjusting shims (20), two slippers (19), four
30. Install plate (46) and two screws (45).
screws (16), nuts (17), and washers (18).
31. Install hoses holder (44), and four screws (43).
42. Install right slipper (15), four elastic pins (14), two
wearing plates (13), four shims (12), two shims
32. Install two flanges (42), front thrust (41), and six
(11), and left slipper (10).
screws (40).
43. Install four screws (7), nuts (8), washers (9), two
33. Install brake-motor reducer (39), and four screws
screws (4), locknuts (5), and washers (6).
(38).
44. Install two screws (1).
34. Install drill mounting assembly (37).
Continued on next page
CED,OUOE019,11 1923MAR994/22
23-77