TM 5-3805-280-24-2
Rock Drill
44
9506
1--Screw (4 used)
10--Switch (2 used)
19--Profile
28--Nut (4 used)
203
2--Washer (4 used)
11--Fixation Assembly
20--Profile
29--Jack Plug
3--Protecting Plate
12--Fixing Plate
21--Locking Plate
30--Thimble
4--Screw (4 used)
13--Connector (21 used)
22--Diode
31--Pin (40 used)
5--Panel
14--Fuse (5 used)
23--Terminal (60 used)
32--Base
6--Housing
15--Fuse Support
24--Shunt (9 used)
33--Box
7--Plug (40 used)
16--Relay (9 used)
25--Protective Cover
8--Packer (34 used)
17--Shunt (8 used)
26--Screw (4 used)
9--Switch
18--PLC
27--Washer (4 used)
22. NOTE: Disassemble the PLC box only to the
27. Inspect, repair or replace parts as necessary.
extent nesessary to inspect, or replace
parts. To facilitate assembly tag all wires
NOTE: When installing electrical type items, do not
prior to removal, and cover all exposed
remove the tape from the wire ends until the
wires with tape.
connection is made, and remove the tags from
the wires after the connection is made.
23. Remove four screws (1), washers (2), and
protecting plate (3).
28. Slide profiles (19 and 20) as necessary to gain
access to parts to be installed.
24. Remove four screws (4).
29. Secure panel (5) and install four screws (4).
25. Tilt panel (5) out of box (33).
30. Install protecting plate (3), four screws (1), and
26. Slide profiles (19 and 20) as necessary to gain
washers (2).
access to parts to be removed.
CED,OUOE019,21 1909APR995/5
23-189
