TM 5-3805-281-24-1
References
USING BOOSTER BATTERIES--24 VOLT
SYSTEM
Before boost starting, machine must be properly shut
down and secured to prevent unexpected machine
movement when engine starts.
CAUTION: An explosive gas is produced while
batteries are in use or being charged. Keep
flames or sparks away from the battery area.
Make sure the batteries are charged in a well
ventilated area.
IMPORTANT: The machine electrical system is a
24-volt negative (-) ground. Connect two
9015
12-volt booster batteries together in
20
series as shown for 24 volts.
7
1. Connect one end of the positive cable to the positive
terminal of machine batteries (A) and the other end to
the positive terminal of booster batteries (B).
2. Connect one end of the negative cable to the negative
terminal of booster batteries. Then connect the other
end of negative cable to the machine frame as far
away from the machine batteries as possible.
Two Battery Application
3. Start the engine.
A--Machine Batteries
B--Booster Batteries
4. Immediately after starting the engine, disconnect the
end of negative cable from the machine frame first.
Then disconnect the other end of negative cable from
the negative terminal of booster batteries.
5. Disconnect the positive cable from the booster
batteries and machine batteries.
CED,TX14795,4152
1914MAY981/1
