TM 5-3805-281-24-1
Tests
SWING GEARBOX START-UP PROCEDURE
IMPORTANT: Swing gearbox will be damaged if not
filled with oil before operating swing
function. Procedure must be performed
whenever a new swing gearbox is
installed or oil has been drained from
the gearbox.
1. Check that drain line plug (A) is installed.
2. Remove fill cap (B). Add oil. (See Swing Gearbox and
Propel Gearbox Oils in Fuels and Lubricants Group of
General Information Section.)
3. Install fill cap. Check oil level on dipstick (C).
9025
A--Drain Line Plug
25
B--Fill Cap
37
C--Dipstick
CED,TX08227,3136
1922MAY981/1
