TM 5-3805-281-24-1
Track System
6. Install DFT1087 Track Recoil Spring Disassembly and
Assembly Guard Tool (F). (See Section 99 for
instruction to make tool.)
7. Install plate (A) and nuts (B) with smallest opening to
01
allow access to nut (D).
0130
45
8. Extend jack ram so there is enough travel to release
spring to an approximate free length of 677 mm (26.7
in.).
Recoil Spring--Specification
Free Length .............................................. 677 mm (26.7 in.) approximate
9. Tighten nuts (B) so plate is tight against retainer plate.
10. Remove valve (C). Remove special plug (E).
A--Top Plate
B--Nut (8 used)
C--Valve
D--Nut
E--Special Plug
F--DFT1087 Track Recoil Spring Disassembly and
Assembly Guard Tool
Continued on next page
CED,OUOE023,141
1926MAY983/4
9-45
