TM 5-3805-281-24-1
CAUTION: To avoid injury from escaping fluid
under pressure, stop engine and relieve the
pressure in the system before disconnecting
hydraulic or other lines. Tighten all connections
before applying pressure.
5. Disconnect hoses (A--D) from propel motor.
CAUTION: The approximate weight of propel
gearbox, motor and sprocket is 568 kg (1252
02
0250
lb).
7
Propel Gearbox, Motor and Sprocket--Specification
Weight.......................................................... 568 kg (1252 lb) approximate
6. Connect propel gearbox, motor and sprocket to a hoist
using lifting straps.
NOTE: For propel motor repair, see Group 0260.
7. Remove cap screws and washers (E). Remove
gearbox and motor.
8. Replace parts as necessary.
A--Propel Motor Drain Port-to-Rotary Manifold
Bottom Tee Port Line
B--Propel Motor "BV" Port-to-Rotary Manifold
Port "4" Line
C--Propel Motor Speed Change Port-to-Rotary
Manifold "P1" Port Line
D--Propel Motor "AV" Port-to-Rotary Manifold
Port "3" Line
E--Cap Screw and Washer (20 used)
Continued on next page
CED,OUOE023,147
1927MAY983/4
10-7