TM 5-3805-281-24-1
IMPORTANT: Metal face seals can be reused if they
are not worn or damaged. A used seal
must be kept together as a set because
of wear patterns on seal ring face.
19. Remove metal face seal (A). Keep seal rings together
as a matched set with metal faces together to protect
surfaces.
20. Inspect metal face seal. (See procedure in this
group.) For seals that are reused, put a piece of
02
0250
cardboard between seal rings to protect seal ring
22
face.
21. Remove bearing cone (B) only if replacement is
necessary. Bearing cone is a press fit.
A--Metal Face Seal
B--Bearing Cone
Continued on next page
CED,OUOE023,156
1927MAY9815/16
10-21
