TM 5-3805-281-24-1
Hydraulic System
9. Install shoulder bolt (C) through link assembly (D) and
end of servo piston. Tighten bolt.
Shoulder Bolt--Specification
Torque ............................................................................. 49 Nm (36 lb-ft)
10. Install plug and O-ring (B).
11. Install O-ring and cover (A). Tighten cover cap
screws.
02
0260
Servo Piston Cover Cap Screw--Specification
18
Torque ............................................................................. 88 Nm (65 lb-ft)
A--Cover
B--Plug and O-Ring
C--Shoulder Bolt
D--Valve Plate and Link Assembly
Continued on next page
CED,OUOE023,174
1901JUN986/14
10-57