TM 5-3805-281-24-2
Removal and Installation
04
0400
14
A--Oil Pressure Switch
D--Start Solenoid
G--Oil Level Switch
I--Fuel Shutoff Solenoid
Connector
Connector
Connector
Connector
B--Engine Temperature
E--Starter Motor (RED +
H--Alternator (B+, WHT)
Switch Connector
Battery Cable)
(D+, BLU/YEL) (Ground,
C--Engine Coolant
F--Starter-to-Frame
BLK)
Temperature Sender
Ground Strap
Alternator (D+, BLU/YEL) Wire Nut--Specification
6. Connect connectors (A, B, D, G, and I).
Torque........................................................................ 2 Nm (20 lb-in.)
7. Install engine coolant temperature sender (C).
Tighten nut.
Alternator (Ground, BLK) Wire Nut--Specification
8. Install starter motor RED positive battery cable (E).
Torque........................................................................ 2 Nm (20 lb-in.)
Tighten nut.
11. Install air conditioning compressor. (See procedure
9. Install starter-to-frame ground strap (F). Tighten nut.
in Group 1830.)
10. Install alternator wires (H). Tighten (B+, WHT),
12. Install air conditioning compressor belt. (See
(D+, BLU/YEL), and (Ground, BLK) wire nuts to
procedure in Group 0510.)
specifications.
13. Install muffler. (See procedure in Group 0530.)
Alternator (B+, WHT) Wire Nut--Specification
Torque........................................................................ 4 Nm (32 lb-in.)
Continued on next page
TX,0400,DH5397 1911NOV963/7
11-14
