NOTE: On engines equipped with elbow fittings and
a. First retighten 3/8-inch cap screws to 68 Nm
drain hose, the threads and sealing surfaces
must be free of any oil film to insure an
effective seal. Apply a light coat of LOCTITE
b. Finally retighten all 1/2-inch cap screws to 156
592 to fittings except for the leading one to
Nm (117 lb-ft).
three threads. Tighten fittings securely.
8. Install pan drain plug (D) using a new O-ring (C)
and tighten to 100 Nm (74 lb-ft).
9. Some engine oil pans may be equipped with an
elbow and drain hose.
LOCTITE is a trademark of Loctite Corp.