TM 5-3805-281-24-2
Group 0505B
Cold Weather Starting Aids
REMOVE AND INSTALL ENGINE COOLANT
HEATER
1. Remove cap screws (1) and remove cover (2).
NOTE: Cap screws holding injection pump lever were
installed with LOCTITE 242. Use heat in order to
soften the LOCTITE.
2. Disconnect injection pump lever.
1--Cap Screw (6 used)
2--Cover
LOCTITE is a trademark of Loctite Corp.
CED,OUOE042,5066 1915APR991/3
05
3. Remove cap screws (3) and remove cover (4).
0505B
1
4. Disconnect all electrical connections.
5. Disconnect all lines, hoses and pipes.
3--Cap Screw (2 used)
4--Cover
Continued on next page
CED,OUOE042,5066 1915APR992/3
