TM 5-3805-281-24-2
Hydraulic System
REMOVE AND INSTALL HYDRAULIC OIL
TANK
33
3360
122
CAUTION: The hydraulic oil tank is pressurized.
High pressure release of oil from pressurized
system can cause serious burns or penetrating
injury. Release pressure from tank by loosening
vent plug. It is not necessary to remove vent
plug.
1. Loosen vent plug (A) to release air pressure in
hydraulic oil tank.
A--Vent Plug
2. Remove covers from bottom and side of hydraulic oil
tank.
3. Remove hood and associated hardware.
CED,OUOE026,2 1911JUN981/8
NOTE: It is not necessary to drain and remove the
hydraulic oil tank if only the return filter element is
being removed. (See procedures in this group.)
4. Remove drain plug (F) to drain hydraulic oil tank.
Approximate oil capacity is 156 L (42 gal).
F--Drain Plug
Continued on next page
CED,OUOE026,2 1911JUN982/8
