TM 5-3805-281-24-2
Hydraulic System
SWING MOTOR AND PARK BRAKE
START-UP PROCEDURE
IMPORTANT: Swing motor will be damaged if not
filled with oil before operating swing
function. Procedure must be performed
whenever a new swing motor is
installed or oil has been drained from
43
the motor.
4360
3
Procedure is to ensure the swing motor
is filled with oil.
1. Disconnect swing motor drain line (A).
2. Fill motor with hydraulic oil through drain port until oil
reaches the level of drain port.
NOTE: Air must be allowed to escape from the swing
motor while filling.
3. Connect drain line.
A--Swing Motor Drain Line
TX,43,GG2763
1915JUL971/1