TM 5-3805-294-23-1
0034
Table 1. DTC 110.15 - Coolant Temperature Signal Slightly High - Continued.
Test or Inspection
Corrective Action
Malfunction
Visually inspect engine coolant
1.
If damaged, replace engine
13.
Engine Coolant
temperature sensor O-ring
coolant temperature sensor O-
Temperature
Sensor O-Ring is
(Volume 3, WP 0412) for
ring. (Volume 3, WP 0412)
Damaged.
damage.
Restore machine to original
condition and operate engine
through normal speed and
load. (TM 5-3805-294-10)
(Volume 5, WP 0794) Clear
and refresh DTCs. (Volume 3,
WP 0362)
2.
If not damaged, proceed to
Malfunction 14.
Visually inspect sensor
1.
If damaged, replace engine
14.
Sensor Housing is
assembly. (Volume 3,
Damaged.
housing (Volume 3, WP 0410)
for damage.
WP 0410) Restore machine to
original condition and operate
engine through normal speed
and load. (TM 5-3805-294-10)
(Volume 5, WP 0794) Clear
and refresh DTCs. (Volume 3,
WP 0362)
2.
If not damaged, proceed to
Malfunction 15.
1.
Connect engine wiring
15.
Engine Coolant
harness connector T04
Temperature
Sensor
(Volume 5, WP 0800, Figure
Temperature Does
69) to removed engine coolant
Not Match Ambient
temperature sensor.
Air Temperature.
2.
Turn key switch to ON position,
but DO NOT START ENGINE.
(TM 5-3805-294-10) (Volume
5, WP 0794)
3.
Select Readings and select
Connect to Model(s). (Volume
3, WP 0363)
4.
Select Dearborn Protocol
Adapter (DPA 4+) USB for the
Readings Adapter, and select
OK. (Volume 3, WP 0363)
5.
Select Engine Control Unit
(ECU) Only. (Volume 3,
WP 0363)
0034-6