TM 5-3805-294-23-1
0087
Table 1. DTC 655.06 - Injector #5 Circuit Has Low Resistance - Continued.
Test or Inspection
Corrective Action
Malfunction
Visually inspect engine wiring
1.
If damaged or has loose
2.
Engine Wiring
harness connector C01 for
sockets, replace engine wiring
Harness Connector
damage and loose sockets.
harness. (Volume 4,
C01 Has Damage or
Loose Sockets.
(Volume 5, WP 0800, Figure
WP 0510) Restore machine to
32)
original condition and perform
Harness Diagnostic Mode
Test. (Volume 3, WP 0345)
2.
If not damaged and does not
have loose sockets, proceed to
Malfunction 3.
Visually inspect electronic fuel
1.
If damaged or has loose pins,
3.
Electronic Fuel
injector wiring harness
replace electronic fuel injector
Injector Wiring
connector C01 for damage and
wiring harness. (Volume 3,
Harness Connector
loose pins. (Volume 5,
C01 Has Damage or
WP 0409) Restore machine to
Loose Pins.
WP 0800, Figure 32)
original condition and perform
Harness Diagnostic Mode
Test. (Volume 3, WP 0345)
2.
If not damaged and does not
have loose pins, proceed to
Malfunction 4.
1.
Remove valve cover. (Volume
4.
Electronic Fuel
Injector Harness is
3, WP 0453)
Damaged.
2.
Visually inspect electronic fuel
1.
If damaged, replace electronic
injector wiring harness for
fuel injector wiring harness.
damage. (Volume 3,
(Volume 3, WP 0409) Restore
WP 0409)
machine to original condition
and perform Harness
Diagnostic Mode Test.
(Volume 3, WP 0345)
2.
If not damaged, proceed to
Malfunction 5.
1.
Remove electronic fuel injector
5.
Short Circuit
harness connectors from #5
Between Electronic
electronic fuel injector.
Fuel Injector
Connector C01 Pin
(Volume 3, WP 0409)
11 and All Other
Pins on Electronic
Fuel Injector Wiring
Harness Connector
C01.
0087-4