TM 5-2420-230-24-1
d. Installation.
Hydraulic cylinder is heavy. Use an appropriate lifting device and follow safe working procedures
when lifting or moving hydraulic cylinder. Failure to comply may result in injury or death to
personnel.
Ensure pins are lubricated before installing. Failure to comply could result in damage to equipment.
NOTE
Ensure all hoses and tubes are reconnected
to positions noted prior to removal.
Install cable ties as necessary.
(1)
Attach suitable lifting device and sling to
dipper cylinder (2).
Use care when removing or installing snap and
retaining rings. Snap and retaining rings are
under spring tension and can act as projectiles
when released and could cause severe eye
injury.
(2)
Use lifting device to position dipper
cylinder (2) and install with two pivot pins (5),
washers (4), and circlips (3).
(3)
Connect two hydraulic hoses (1) to dipper cylinder (2).
e. Follow-On Maintenance.
(1)
Start engine and functionally test cylinder (TM 5-2420-230-10).
(2)
Check for leaks.
(3)
Shut OFF engine (TM 5-2420-230-10).
(4)
Fill reservoir as required (Para 10-9).
(5)
Remove "Do Not Operate" tag from ignition switch (TM 5-2420-230-10).
END OF TASK
Change 1
10-41
