TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Lube Pump - Installation (0-74)
B Series Shop Manual
Page 0-55
Lube Pump - Installation (0-74)
Lubricate the pump with clean engine oil.
Caution: Fill the lube pump before installation to aid
with priming during engine start up.
The idler gear pin fits into a locating bore in the cyl-
inder block.
Install the lube pump.
The sealing plate on the back of the pump will seat on the
cylinder block and the capscrews should not draw the
flange up to the block.
13 mm
Tighten the capscrews in the sequence shown.
Torque Value: 24 Nm
[18 ft-lb]
L-144
