TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Timing Pin - Installation (0-78)
B Series Shop Manual
Page 0-61
15 mm
Remove the plate and rotate the engine until the pointer
aligns with the TDC mark.
Look for the timing pin hole in the camshaft gear. If it is
not visible, rotate the crankshaft one complete turn and
align the pointer with the TDC mark.
T-25 Torx
Install the timing pin assembly.
Push the pin into hole in the cam gear to align the hous-
ing.
Hold the pin in while tightening the torkscrews.
Torque Value: 5 Nm
[48 in-lb]
L-150
