TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Balancer - Installation (0-79)
B Series Shop Manual
Page 0-65
Remove the locking capscrew or allen wrench from the
balancer.
8 mm Allen
Tighten the idler gear retainer capscrews.
Torque Value: 57 Nm
[42 ft-lb]
Measure the idler gear backlash.
Backlash
mm
in
0.088
MIN
[0.003]
0.420
MAX
[0.017]
If the idler gear does not meet the specifications, loosen
the idler gear retainer capscrews. Reposition the idler
gear and tighten the capscrews.
Torque Value: 57 Nm
[42 ft-lb]
The Crankshaft Must Rotate Freely
If the crankshaft does not rotate freely, make sure the
balancer does not have an interference.
L-154
