TM 5-2420-230-24-2
Section 0 - Engine Disassembly and Assembly - Group 00
Oil Cooler - Installation (0-84)
B Series Shop Manual
Page 0-69
Oil Cooler - Installation (0-84)
Caution: If a new element is to be installed, be sure to
remove the shipping plugs.
Insert two capscrews through the oil cooler cover. Pack-
age the cooler cover gasket, oil cooler, oil cooler gasket
and oil cooler cover.
10 mm
Install the ``package'' on the cylinder block.
Torque Value: 24 Nm
[18 ft-lb]
Side Oil Fill - Installation (0-85)
15 mm
If the engine is so equipped, install the side oil fill as-
sembly and o-ring.
Torque Value: 43 Nm
[32 ft-lb]
Fuel Transfer Pump - Installation (0-86)
Caution: When installing piston style transfer pumps,
alternately tighten the mounting capscrews. As the
capscrews are tightened, the transfer pump plunger is
pushed into the pump. Failure to tighten the capscrews
in an even manner can result in the plunger being bent
or broken.
Install the fuel transfer pump, gaskets and spacer if using
a piston style pump.
Torque Value: 24 Nm
[18 ft-lb]
L-158