TM 5-2420-230-24-2
Injection Pump Timing - Bosch VE (5-08)
Section 5 - Fuel System - Group 05
Page 5-22
B Series Shop Manual
Install the dial indicator into the timing tool extension.
Set the indicator to allow at least 3.0 mm travel. Tighten
the locking sleeve finger tight.
NOTE: The indicator travel should be set with the pump
unlocked.
At the point of injection the key way of the shaft will align
with the delivery valve receiving the injection, and the
illustrated hash mark on the seal housing.
NOTE: The illustrated mark is for reference only and should
not be used for setting the pump timing.
The number one cylinder delivery valve is marked as
illustrated.
4 cylinder =A
6 cylinder =D
Firing Order
4 Cylinder
6 Cylinder
A =1
D =1
B =3
E =5
C =4
F =3
D =2
A =6
B =2
C =4
L-320