TM 5-2420-230-24-2
Crankshaft Wear Sleeve, Rear (001-067)
B3.9 and B5.9 Series Engines
Page 1-114
Section 1 - Cylinder Block - Group 01
10 mm
Align the rear cover evenly with both sides of the oil pan rail
on the cylinder block.
Tighten the rear cover capscrews.
Torque Value: 9 Nm
[80 in-lb]
Trim the gasket evenly with the oil pan mounting surface.
NOTE: Make sure the gasket trim does not enter the engine.
Install the four rear oil pan mounting capscrews to the pan.
Torque Value: 24 Nm
[18 ft-lb]
L-792