TM 5-2420-230-24-2
Push Rods or Tubes (004-014)
B3.9 and B5.9 Series Engines
Page 4-4
Section 4 - Cam Followers/Tappets - Group 04
Install (004-014-026)
Install the push tubes into the sockets of the valve tappets.
Lubricate the push tube sockets with clean lubricating en-
gine oil.
NOTE: The push tubes and tappets must be installed in the
same cylinder and intake or exhaust position from which
they were removed.
Make sure the rocker lever adjusting screws are completely
backed out.
Install the rocker levers. Refer to Procedure 003-008.
Adjust the valves. Refer to Procedure 003-004.
Install rocker lever cover(s) and gasket(s). Refer to Proce-
dure 003-011.
Tighten all capscrews.
Torque Value: 24 Nm
[18 ft-lb]
L-848
