TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Fuel Injection Pumps, In-Line (005-012)
Section 5 - Fuel System - Group 05
Page 5-25
CAUTION
Do not attempt to pull the pump flange into the gear
housing with the mounting nuts as damage to housing
can occur.
15 mm
Install the mounting nuts.
Torque Value: 43 Nm
[32 ft-lb]
Install the support bracket (if equipped).
Torque Value: 32 Nm
[24 ft-lb]
CAUTION
Do not drop the nut and washer. Dropping the nut and
washer will result in the need to remove the front cover.
30 mm
Install the retaining nut and washer.
Torque Value: 10 to 15 Nm
[89 to 133 in-lb]
To prevent damage to the timing pins, do not exceed the
torque value given. This is not the final torque value for the
retaining nut.
Disengage the engine timing pin.
L-885
