TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Lubricating Oil Pump (007-031)
Section 7 - Lubricating Oil System - Group 07
Page 7-25
Install (007-031-026)
Install the back plate.
CAUTION
Failure to fill the pump with oil during installation can
result in a slow prime at initial engine start-up, resulting
in severe engine damage.
Lubricate the lubricating oil pump with clean lubricating
engine oil.
CAUTION
Make sure the idler gear pin is installed in the locating
bore in the cylinder block. Failure to do so can cause
engine damage.
Install the lubricating oil pump.
13 mm
Tighten in the sequence shown.
Torque Value: 24 Nm
[18 ft-lb]
L-1037