TM 5-2420-230-24-2
B3.9 and B5.9 Series Engines
Lubricating Oil Pump (007-031)
Section 7 - Lubricating Oil System - Group 07
Page 7-27
10 mm
Three-BondTM Sealant, Part No. 3823494
Apply a thin bead of Three-BondTM sealant, Part No.
3823494,or equivalent, to the front cover side of the gasket
only.
NOTE: Do not remove the plastic seal pilot tool from the
lubricating oil seal at this time. Use the plastic seal pilot tool
to guide the seal on the crankshaft.
Install the gasket and front cover on the engine.
Tighten the front cover mounting capscrews.
Remove the plastic pilot tool from the crankshaft.
Torque Value: 24 Nm
[18 ft-lb]
Install the front cover access cap and seal.
15 mm
Install the crankshaft pulley or vibration damper. Do not
tighten the capscrews to the correct torque value at this
time.
Refer to Procedure 001-052.
L-1039