Table 1. Before PMCS - Continued.
NOT FULLY MISSION
Open filler cap slowly.
Park machine on level surface.
Check hydraulic oil level via sight glass Cap missing. Class III oil leak.
in tank. If required, clean around filler cap Oil is above or below marks on
(Item 18, WP 0033) and add proper grade the sight glass.
of oil (Table 5) to bring to the correct
level. Check for presence of chain. Check
for presence and condition of gauge. Refit
and secure filler cap.
Figure 3. Hydraulic Oil Level
Check for exterior fluid leaks, missing
Any brake fluid leak. Any fuel
items, or damage to equipment.
leak or Class III oil or coolant
leak. Sheet metal torn or sharp
Front Bucket Verify all cylinder securing struts, bars,
Travel bars, locking devices, or
locking devices, and safety pins are pres- safety pins are missing or dam-
ent and can be used to securely lock the aged.
machine in the travel/maintenance posi-