TM 5-2420-232-10
0017
Table 1. Before PMCS - Continued.
LOCATION
ITEM TO
ITEM
NOT FULLY MISSION
CHECK/
MAN-
NO.
CAPABLE IF
PROCEDURE
SERVICE
INVERVAL HOURS
a. Inspect sand bagger assembly for
Sand bagger assembly is cracked,
37
Before
Sandbagger
cracks, damage, broken welds, and loose damaged, has broken welds, or
or missing hardware.
has loose or missing hardware.
b. Inspect hoses and fittings for damage Hose or fitting is damaged or
and leaks.
leaks.
a. Inspect snow plow assembly for
Snow plow assembly is cracked,
38
Before
Snow Plow
cracks, damage, broken welds, and loose damaged, has broken welds, or
or missing hardware.
has loose or missing hardware.
b. Check hitch locking mechanism to
Hitch does not lock correctly.
ensure proper operation.
c. Inspect hoses and fittings for damage Hose or fitting is damaged or
leaks.
and leaks.
d. Lubricate with grease before
operation.
END OF TASK
Table 2. During PMCS.
017
LOCATION
ITEM TO
ITEM
NOT FULLY MISSION
CHECK/
MAN-
NO.
CAPABLE IF
PROCEDURE
SERVICE
HOURS
INVERVAL
a. Operate steering controls and note any
Binding or excessive play or con-
1
During
Controls,
binding or excessive play.
trols unresponsive.
Steering,
b. Operate gear selector controls and
Binding or excessive play in gear
Gear Selector,
note any binding or excessive play.
selector controls.
Accelerator,
and Brake
c. Operate accelerator pedal and note
Accelerator pedal not working
any binding or excessive play.
properly.
d. Operate brake pedal and note any
Binding or excessive play in
binding or excessive play.
brake pedal.
a. Operate suspension mode switches
Suspension mode inoperable.
2
During
Controls,
and check for correct selection and
Suspension
operation (WP 0004).
Mode, Steer
Steer mode inoperable.
b. Operate steer mode switches and
Mode, and
check for correct selection and operation
Drive Mode
Operation
c. Operate drive mode switch and check Drive mode inoperable.
for correct selection and operation (WP
0017-11
Change 1