TM 5-2420-232-10
0017
Table 3. After PMCS - Continued.
LOCATION
ITEM TO
ITEM
NOT FULLY MISSION
CHECK/
MAN-
NO.
CAPABLE IF
PROCEDURE
SERVICE
INVERVAL HOURS
Front Bucket a. Visually check for loose or missing
Any part missing. Class III leak.
13
After
bolts, fittings, hoses, shanks, and digging Mounting points cracked or dam-
teeth. Check for cracks or broken welds aged. Tighten teeth if loose.
and mounting points.
b. Visually inspect hydraulic lines,
Class III leak.
fittings, control valve, and cylinders for
leaks or damage.
c. Check front bucket frame assembly, Broken or cracked welds. Loose
lift arms, quick hitch, and bucket
or missing hardware.
assemblies for physical damage or broken
welds.
d. Verify all cylinder securing struts,
Travel bars, locking devices, or
bars, locking devices, and safety pins are safety pins are missing or dam-
present.
aged.
ENGINE
COMPART
-MENT
14
After
Fuel System
WARNING
Ensure all safety devices are fitted and secured before working in the
engine compartment (WP 0021). Failure to follow this warning may
result in injury or death to personnel.
a. Open engine compartment hood (WP
b. Check fuel line for broken or damaged Any fuel leak.
fittings and ensure all lines and fittings
are secure.
c. Check fuel/water separator for
Excessive debris in separator or
contamination and leaks. Service if
fuel leak.
required (WP 0018).
Cooling Pack a. Check for debris blocking the cooling Excessive debris blocking cool-
15
After
ing pack air intake or cooling
pack intake grille or the cooling pack
pack radiators.
radiators (WP 0019).
b. Check coolant radiator for leaks and
Radiator damaged. Class III cool-
damage.
ant leak.
c. Check hydraulic cooler radiator for
Radiator damaged. Class III oil
leak.
leaks and damage.
Change 1
0017-18
