TM 5-2420-232-10
0017
Table 3. After PMCS - Continued.
LOCATION
ITEM TO
ITEM
NOT FULLY MISSION
CHECK/
MAN-
NO.
CAPABLE IF
PROCEDURE
SERVICE
INVERVAL HOURS
Cooling Pack d. Check transmission cooler radiator for Radiator damaged. Class III oil
15 After
leaks and damage.
leak.
Con't
e. Check intercooler radiator for leaks
Radiator damaged. Visual audible
leakage.
and damage.
WARNING
16
After
A/C
The A/C system is a closed loop system and contains pressurized
refrigerant. No part of the system should be disconnected until the
system has been discharged by a refrigeration engineer or a suitable
trained person. You can be severely frostbitten or injured by escaping
refrigerant.
Check A/C condenser for damage. Report Condenser damaged.
any damage to Field Maintenance.
Close and securely latch the hood and
Hood/nosecone cannot be
17
After
Hood and
nosecone.
securely latched.
Nosecone
Mirrors missing, broken, or
Mirrors Side Check mirrors for presence, cracks, and
18
After
cracked, or side mirrors covered
and Rearview serviceability.
with frost, ice, snow, dirt, mud, or
grime.
NOTE
19
After
Impact
Wrench
Perform After PMCS on Item Nos. 19 thru 30 if required for mission.
a. Wipe all tool surfaces clean.
b. Inspect tool for damage and leaks.
Tool is damaged or leaks.
c. Check all fittings and fasteners for
Fitting or fasteners is loose or
looseness and leaks.
leaks.
a. Inspect entire chain tension and
Chain tension incorrect. Chain
20
After
Chain Saw
sharpen chain if necessary (WP 0035).
dull, worn, or damaged.
b. Check operation of automatic oiler
Oiler improperly set.
c. Inspect tool for damage and leaks.
Tool is damaged or leaks.
d. Inspect hoses for cuts, cracks, bulges, Hose is cut, cracked, bulged, or
and leaks.
leaks.
e. Check all fittings and fasteners for
Fittings or fasteners are loose or
looseness and leaks.
leaks.
a. Wipe all tool surfaces clean.
21
After
Pavement
Breaker
b. Inspect tools for damage and leaks.
Tool is damaged or leaks.
c. Inspect hoses for cuts, cracks, bulges, Hose is cut, cracked, bulged, or
and leaks.
leaks.
d. Check all fittings and fasteners for
Fitting or fastener is loose or
leaks.
looseness and leaks.
0017-19
Change 1
