TM 5-2420-232-10
0040
SIDESHIFT FORKLIFT CARRIAGE
0040
There is a second (auxiliary) control lever next to the standard one. The standard lever operates as described earlier. The sec-
ond (auxiliary) lever operates the sideshifting and the rotation of the forklift carriage.
The two levers can be operated at the same time to produce combined forklift actions. The lever movements and their effects
on the forklift are shown on a plastic decal located close to the lever.
WARNING
Accidents can be caused by working in poor visibility. Keep windows clean and use your lights to
improve visibility. Do not operate the machine if you cannot see properly. Failure to follow this
warning may result in injury or death to personnel.
1.
Sideshift LEFT (As Seen from Operator s Seat). To sideshift the forklift carriage (Figure 5, Item 1) to the LEFT, push the
lever (Figure 5, Item 2) forward.
2.
Sideshift RIGHT (As Seen from Operator s Seat). To sideshift the forklift carriage (Figure 5, Item 1) to the RIGHT, pull
the lever (Figure 5, Item 2) backwards.
435-A0295
Figure 5. Sideshift Forklift Carriage
040
0040-6