12
TM 5-2420-232-10
SUPPORTING INFORMATION
-
SPK ROTARY SWEEPER
0041
DESCRIPTION
0041
This sweeper is designed solely for the use in construction cleanup, road maintenance, and similar operations. Use in any way
other than intended can be dangerous to personnel.
OPERATOR SAFETY/WARNINGS
0041
1.
Improper installation, operation, or maintenance of this equipment could result in serious injury or death. Operators and
maintenance personnel should read this manual as well as all manuals related to this equipment thoroughly before begin-
ning installation, operation, or maintenance. Follow all safety instructions.
2.
Read all safety decals and safety statements prior to operating this equipment. Know and obey all OSHA regulations,
local laws.
WARNING
Know your equipment.
Know your equipment s capabilities, dimensions and operations before operating.
Protect against flying debris.
Always wear proper safety glasses, goggles or a face shield when driving pins in or out or when
operation causes dust, flying debris, or any other hazardous material.
Do not disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure.
Escaping hydraulic fluid under pressure can penetrate the skin, causing injury or death to
personnel.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to follow this warning may result in injury or death to personnel.
Do not operate equipment until you are completely trained by a qualified operator in how to use the
controls, know its capabilities, dimensions, and all safety requirements.
Keep all step plates, grab bars, pedals, and controls free of dirt, grease, debris, and oil.
Never allow anyone to be around the equipment when it is operating.
Do not allow riders on the attachment.
Do not operate the equipment from anywhere other than the correct operators position.
Never leave equipment unattended with the engine running or with this attachment in a raise
position.
Do not alter or remove any safety feature from this attachment.
Know your work site safety rules as well as traffic rules and flow.
Failure to follow these warnings may result in injury or death to personnel.
0041-1
