TM 5-3805-280-10
Operator's Station
REMOVING AND STORING THE LOWER
FRONT WINDOW
NOTE: Upper front window must be raised before lower
front window can be removed.
1. Pull in on lock pins (A) to unlock and remove window.
TX,10,DH5491 1927FEB971/2
2. The window can be stored by inserting tabs on bottom
of window into brackets (B) and locking the pins into
holes (C) located below rear window in cab.
NOTE: In cold weather some operators may choose to
work with the top glass open and the bottom glass
in place. This provides excellent visibility and
tends to hold the heat being circulated around the
operator's feet.
TX,10,DH5491 1927FEB972/2
OPENING SIDE WINDOWS
CAUTION: Avoid serious crushing injury from
boom. Never place any part of body beyond
window bar or frame. It could be crushed by the
boom if boom control lever is accidentally
bumped or otherwise engaged.
Do not remove window bars. If window or bars
are missing or broken, replace immediately.
Both right side window and cab door window can be
opened.
1. Right-rear side window: Unlatch the lock (A). Push joint
part of lock to open window.
2. Cab door window: Slide front pane to the rear and rear
pane to the front.
TX,10,DH5492 1904JUN961/1
2-23