TM 5-3805-280-10
AUTOMATIC SHUTDOWN / DIAGNOSTICS
Should any of these problem situations occur, the
unit will automatically shutdown and stop.
BEFORE restarting the unit or flipping the POWER
switch to "Off", check the DIAGNOSTICS area on
the instrument panel.
The upper four (4) lamps are electronically
"latched" to only respond to the first or primary
signal for a shutdown. In other words, if the
automatic shutdown is the result of one of these
four problems, only that particular problem lamp
will be lit. And the lamp will remain lit as long as
the batteries provide power.
Refer to OPERATING CONTROLS AND
INSTRUMENTS, for the various problem signal
criteria (F, psi, etc.). The indicated problem area
should be inspected for a physical cause (low fluid,
broken fan belt, evidence of excessive heat, etc.)
and corrections made.
The shutdown will automatically reset when the
problem condition is corrected.
Other possible causes for an unexpected
shutdown are listed on the Trouble Shooting Chart.
7-36