TM 5-3805-280-10
Maintenance--Every 500 Hours
4. Remove fuel inlet line (A) and plug (C).
5. Flush any debris from filter base (B).
6. Install fuel inlet plug and fuel inlet line.
7. Assemble primer assembly and install onto fuel filter
base.
8. Install new filter. (Follow instructions on filter.)
9. Install sediment bowl.
10. Bleed fuel system. (See Bleeding Fuel System in
Maintenance chapter.)
TX,80,DH5123
1926JUL962/2
CHECK AIR INTAKE HOSES
Check hoses (A) for cracks. Replace as necessary.
Tighten clamps.
TX,80,DH5575
1925JUL961/1
15-5