TM 5-3805-280-10
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD
ITEM
INTERVAL
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
NO.
PROCEDURE: DO THE PMCS AND HAVE ITEM
READY/AVAILABLE
REPAIRED, FILLED, OR ADJUSTED AS NEEDED
IF:
53
Monthly
Check Swing Gearbox Oil Level
(1) Park machine on level surface.
(2) Remove dipstick (A). Oil must be in the
Oil is below the ADD or
operating range.
SAFE mark on the dipstick
(3) If oil is needed, remove filler cap (B) and add
oil (see Fuels and Lubricants, Chapter 9).
(4) Recheck oil level.
54
Monthly
Drain Hydraulic Tank Sump
WARNING: High-pressure release of oil from
pressurized system can cause serious burns or
penetrating injury. The hydraulic tank is
pressurized. Do not remove plug (A). Release
pressure by loosening vent plug.
(1) Loosen vent plug (A) to release hydraulic
pressure.
A-23