TM 5-3805-280-10
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES
FOR HYDRAULIC EXCAVATOR 230LCR/230LCRD
ITEM
INTERVAL
ITEM TO BE INSPECTED
EQUIPMENT IS NOT
NO.
PROCEDURE: DO THE PMCS AND HAVE ITEM
READY/AVAILABLE
REPAIRED, FILLED, OR ADJUSTED AS NEEDED
IF:
43
Weekly
Grease Working Tool Pivots
*As Required
(1) Pump grease (see Fuels and Lubricants,
Fittings damaged or
Chapter 9) into the 20 indicated grease points.
missing
Grease until grease escapes from joints.
(2) *As required:
a. Grease every 4 hours during the first 20 hrs.
b. Grease daily during the first 30--100 hrs and
when working in mud and water or sand.
Three Points
Three Points
Two Points
One Point
Three Points, A--Left Side Shown
Five Points
Two Points
One Point
A-19