TM 5-3805-280-24-2
Camshaft, Balancer Shafts and Timing Gear Train
REMOVE TIMING GEAR COVER
16
13
NOTE: It is not necessary to remove water pump pulley,
water pump, or belt tightener when removing
timing gear cover.
1. Drain oil from engine crankcase.
2. Remove fan.
3. Remove oil pan.
4. Remove oil cooler-to-water manifold elbow (A) at front
plate.
5. Release fan belt tensioner (B) and remove fan belt (C).
6. Remove alternator (D) and alternator mounting bracket.
7. On non-auxiliary drive engines, remove tensioner
bracket.
8. Remove water pump (E), if desired.
9. Remove fan pulley (F).
10. Remove crankshaft pulley or damper (G). (See Group
15.)
A--Oil Cooler-to-Water Manifold Elbow
B--Fan Belt Tensioner
C--Fan Belt
D--Alternator
E--Water Pump
F--Fan Pulley
G--Crankshaft Pulley or Damper
Continued on next page
RG,16,DT7506 1914NOV971/4
13-245